Machine Embroidery Hooping Technique
Posted: Wednesday, March 29, 2006
by Deb Schneider
Windstar Embroidery Designs
When machine embroidering large and/or stitch-intensive designs I use this hooping technique to make certain the fabric will not pucker or move during the embroidering. It is especially useful when embroidering those designs that have an outline because even the slightest movement of the fabric will cause the outline to be noticeably off.
The steps pictured below show how I do it and what works for me but that does not mean it is the only way or even the right way. Please keep in mind that this hooping technique is by no means for all machine embroidery projects. It is a machine embroidery hooping option and finding what works best for you is a matter of good ol' trial and error.
I like the Sulky brand because:
- It has a grid that comes in very handy for positioning.
- The slightly waxy paper coating over the sticky has enough tension to prevent it from slipping in the hoop. I've tried a few other brands and found just the opposite to be true. The stabilizer kept moving when I tried to hoop it. Not so with the Sulky brand.
- I have also found the Sulky paper coating easier and quicker to remove than other brands.
|
Hooping the Stabilizers Here I am hooping the Sulky Sticky and a layer of tear-away stabilizer in a 5" by 7" hoop with the sticky on top. I cut both stabilizers a little wider and longer than the hoop. |
 |
|
The Stabilizers Hooped Be certain the stabilizers are secure in the hoop: Tight, flat and without puckers or bubbles. |
 |
|
Like a Tambourine Turn your hoop over and check to see if it is 'tight as a drum' or like a tambourine. Betcha can't resist thumping it! |
 |
|
Remove the Paper Lightly score the sticky's release side and remove it to expose the sticky backing. |
 |
|
Mark the Sticky Use your hoop's grid template to place marks on the stabilizer to locate the straightline center and right and left edges. Be sure to place your grid gently over the sticky with the bowed side up. Otherwise the sticky will do its job and grab onto your template. |
 |
|
Lining Up Your Fabric I'm going to embroider a quilt block. Here I have my pre-cut block aligned on my measuring board where I have located the center of the block. |
 |
|
Marking Your Fabric Using your hoop's grid, marking the straightline center and right and left edges of the fabric. Important: Place these marks on the backside of the fabric. |
 |
|
Affixed the Fabric Grasp your fabric from the backside on the marks to make a gentle fold and carefully line it up with the marks you made on the sticky. Gently lay out the fabric on the sticky and smooth it to the edges to get good adherence all around. |
 |
|
Lock the Fabric I like to lock the fabric to the part of the stabilizer that is hanging over the edge of the hoop (the part with the paper still on) just to make sure it doesn't get caught on anything while embroidering. Here I'm pinning it but double stick tape works great, too. |
 |
|
Ready to Embroider And that's it. The fabric is smooth, taut and ready for embroidery. |
 |
|
The Embroidered Result Your designs will come out perfect with no puckering or mis-aligned outlines! |
 Hooping Sulky® Sticky Stabilizer & a Layer of Tearaway Stabilizer |
This Article has been viewed 4,755 times. (Not updated in real-time.)
Top-level comments on this article: (3 total)I have to comment... this is just so excellent, with the large clear photos of instruction!
Very good article with great pictures - thanks!
This was very helpful! Thank you. I have recently learned how to machine applique. Any suggestions on how to applique letters with even spacing and straight?
We want your comments! If you can read this, you don't have javascript enabled, so you can't use this comment system. Please enable javascript.